文章分类

当前位置:极速3分彩>文章中心>行业新闻>hbe-softex-es28/38 联轴器 弹性体

hbe-softex-es28/38 联轴器 弹性体

发布时间:2020-02-07 点击数:19

If you want to replace an existing KMPP reducer with an EMPP drive, the time required for the retrofit is very reasonable because the new coupling has the same housing size and requires the same foundation and device design。hbe-softex-es28/38 EMPP uses a separate housing for easy transportation, installation and field maintenance。 Extremely strong and resistant to wear。 Due to the static seal and cooling by transformer oil, this motor has a high degree of protection and the stator windings are extremely durable (ATEX compliant)。 The transmission is equipped with an automatic frequency converter control system, which not only has variable speed, but also ensures quiet operation under high loads, and provides continuous protection against overload caused by voltage fluctuations。 hbe-softex-es28/38Increasingly large-scale production facilities are being used in the field of vertical mills。 It is known that traditional mills are subject to many restrictions at this time。 The new HBEEMPP transmission was developed specifically to significantly increase the availability of large vertical mills。 This transmission uses a newly developed motor。

 It can also transport materials. Various ropeway systems are being used in practice. And support the grinding table. The higher axial forces generated during the grinding process are transmitted to the foundation via thrust bearings and gear housings. Therefore, the coupling of the vertical mill has special reliability requirements. For this reason, many vertical mills will use mature and reliable bevel gear star couplings (HBEKMS, KMP, KMPS and KMPP) worldwide. With the new EMPP transmission, extremely high plant availability and long operating life can be achieved, while the grinding process can be optimized and the grinding results significantly improved. For vertical mills, the limitation is that they require extremely high power ratings and high availability. Couplings ahbe-softex-es28/38re the central component of such vertical mills. Couplings are used to transmit power and reduce the motor speed to the required grinding speed. In addition, the rest of the mechanical components are only subjected to the lower dynamic loads to date.

Extremely heavy ropeways often produce varying radial and axial loads over several kilometers in length, which can be absorbed by specially reinforced input shaft bearings. HBE couplings are available and serviced worldwide. ■ Special seals on the input and output shafts. Continuous single-rope aerial ropeways are often seen in ski resorts and are usually in the form of overhead tackle or pods. Obviously, the couplings for this application must meet many special requirements: all passenger transportation systems must meet very strict safety standards. The temperature of the environment in which the gondola is located varies greatly and runs almost continuously from the moment it is put into use. Therefore, HBE couplings for ropeways must not only be compact. This is especially thehbe-softex-es28/38 case when constant-speed transmissions with optimized costs are required. This bevel gear planetary coupling has a very compact structure and high power, with 36 specifications, which can meet the requirements in the higher rated power range in many applications. Raw material grinders; ropeways not only transport people.

They have a proven "dry-well" design that prevents oil leakage and protects the environment. Such as HBE planetary couplings and HBE couplings. ■ Provide couplings, torque reaction arm systems, couplings, and oil supply systems from a single source. Water turbines are turbines that convert potential energy in the water into mechanical energy; this mechanical energy is subsequently converted into electrical energy in a generator. Couplings for water turbines increase the lower turbine speed to a very high generator speed. Between two rollers rotating in opposite directions, the small dry particles are subjected to a high specific pressure. In a roller compactor, fine-grained material is presshbe-softex-es28/38ed into a fine powder or into a uniform shape or plate. Rollers used in the cement and mining (copper, gold, diamond) industries are used to reduce the particle size of materials and are usually located in front of other mills. In all areas, customers rely on proven transmissions. It also requires low noise and moderate weight. They use extremely high quality transmission components and extremely strong seals.

在线客服
  • 销售热线
    13166059228

秒速时时彩 上海时时乐 秒速时时彩 澳洲幸运10开奖结果 欢乐生肖 吉林快3 大乐购彩票计划群 赖子棋牌 极速快乐8 上海时时乐开奖